MAG boxes from Infomir are made for portal-based IPTV, which makes them the most natural way to watch GLOTV IPTV. There is no app to install: you only add our portal address to the box. This guide works for common models such as the MAG 322, 424 and 524.
What you will need
- Your MAG box connected to the TV and to the internet (Ethernet is best).
- The remote control.
- A GLOTV IPTV plan – see the prices.
Step 1 – Find your MAC address
Every MAG box has a unique MAC address that starts with 00:1A:79. You can read it on the sticker under the box, or on screen in Settings > Device info. Write it down carefully: a single wrong character will stop the activation.
Step 2 – Send the MAC address to GLOTV IPTV
Send the MAC address to us on WhatsApp together with the plan you want. We register it on our portal and reply with your portal URL.
Step 3 – Add the portal on the box
- On the MAG home screen, open Settings (the gear icon), then System settings.
- Choose Servers, then Portals.
- In Portal 1 name, type GLOTV.
- In Portal 1 URL, type the address we sent you exactly, including http:// and the final slash.
- Press OK to save.
Step 4 – Restart the box
Go back to the settings menu and choose Reboot, or unplug the box for 10 seconds. When it starts again, it loads the GLOTV IPTV portal with your live channels, movies, series and TV guide.
Troubleshooting
- “Portal not found” or a black screen: check the portal URL letter by letter and make sure there is no space at the end.
- “Your STB is blocked”: the MAC address is not active yet – send us a photo of the sticker so we can compare.
- Stuck on the loading page: check that the box has internet (Settings > Network), then reboot.
- Wrong time in the TV guide: set your time zone in Settings > System settings > Time.
No MAG box? You can use an app that imitates one on your Smart TV, Firestick or phone – see our setup guide.